A wired wall thermostat can be connected to the
unit. If it is, this dip switch must be moved to the
Wall Thermostat Enable Position before the wall
thermostat will begin control.
This setting is typically used for emergency heating.
On heating mode, the set temperature
Low temp. protection enable
Low temp. protection disable
Use PTAC
other wall
thermostat
Use some type of wall
thermostat
Consult with the sales agency
or manufacturer for details
Use control panel only
Use control panel or some
type of wall thermostat
Use control panel or some
type of wall thermostat (the
other one must be turned off)
