INSTALLATION INSTRUCTIONS
10
Installation in a double-hung sash
window
2. Attach the window slider kit to the foam seal B. Adjust the
length of the window slider kit according to the width of
window, shorten the adjustable window kit if the width of
window is less than 22.1 inches.
Open the window sash and place the window slider kit on
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the
open gap between the top window sash and outer window
Foam seal A
(adhesive type)
Foam seal
Fig.10
Fig.11
Window kit
Window stool
Window kit
Window stool
22.1
38.6
~
1. Cut the foam seal A (adhesive type) to the proper length and
to the proper length and place it on the above foam seal A.
(Fig. 9)
attach it to the window stool. (Fig. 8). Then cut the foam seal B
the foam seal B. (Fig. 9)
3. Cut the foam seal (adhesive type) to the proper length and
attach it on the top of the window kit. Shown as in Fig. 10
sash. Shown as in Fig. 11.
Fig. 8
Foam seal B
Fig. 9
Foam seal B
.