Garrick BS260, Instruction Manual

Page: 12 / 28

emulsifiable oil as directed by the manufacturer
(normally approx. 10
%
oil).
·
Make sure that the quantity of coolant which is
distributed during the cutting operation is sufficient. The
blade must be well lubricated.
·
Before operating the machine, check its general
efficiency and familiarize yourself with the control
devices and their functions.
3.3 GENERAL CONTROLS
WARNING!
Before starting the saw check that the machine is
working correctly, that the safety devices are
perfectly operational and that the blade slides
smoothly.
Check that there are mo damaged elements, that all
the parts have been assembled correctly and that they
are on perfect working order. Doubtful safety devices
and damaged parts must be repaired or replaced by
specialized personnel or through a service centre
authorized by the Manufacturer.
DANGER!
If the operator has any doubts whatsoever about the
safety of the machine, he must stop the machine
immediately, determine the cause for the problem and,
if necessary, contact the manufacturer’s assistance
service.
11