GarrettCom Magnum QS5108 Installation And User Manual Download Page 50

Page: 50 / 55

Magnum Quad-Series Fiber Switches

Installation and User Guide (06/03)

GarrettCom reserves the right to ch

units

er warranty. Testing and repair of p

arge for the testing of non-defective

und

roduct that is not under warranty will

result in a

6.4

please follow these

in ructio

1. Package the unit carefully. It is recommended that you use the original

be wrapped in a "bubble-wrap" plastic

this

packing

nit.

mark the Return Material Authorization (RMA) number on the

outside of the shipping container.

APPENDIX

customer (user) charge.

Shipping and Packaging Information

Should you need to ship the unit back to GarrettCom,

ns:

container if available. Units should
sheet or bag for shipping protection. ( You may retain all connectors and
Installation Guide.)

CAUTION

Do not pack the unit in Styrofoam "popcorn" type

material. This material may cause electro-static shock damage to the u

2. Clearly

3. GarrettCom is not responsible for your return shipping charges.

4. Ship the package to:

GarrettCom,

Inc.

47823 Westinghouse Dr.

Fremont, CA 94539

Attn.: Customer Service

A: WARRANTY INFORMATION

GarrettCom, Inc. warrants its products to be free from defects in materials

pment by

rret

Garrett

on of GarrettCom, the

produc

plication, or as a result of service or

ettCom.

a charge for handling and

inspec

ch turns out not to be

faulty.

Power Supply (Internal

and workmanship for a period of three (3) years from the date of shi
Ga

tCom.

During this warranty period, GarrettCom will repair or, at its option,

replace components in the products that prove to be defective at no charge other
than shipping and handling, provided that the product is returned pre-paid to

Com.

, in the opini

This warranty will not be effective if

misuse, misap

t has been damaged by

modification other than by Garr

GarrettCom reserves the right to make

ting any product returned for warranty repair whi

and mail it to Ga

Please complete the warranty card as this acts as a product registration,

rrettCom within two weeks of your purchase.

APPENDIX B: MAGNUM INTERNAL DC POWER SUPPLY OPTION

B1.0

SPECIFICATIONS - FOR MAGNUM QUAD-SERIES SWITCHES

-48 VDC Option)

www GarrettCom com

Summary of Contents for Magnum QS5108
























































Search results

Summary of Contents for Magnum QS5108

Reviews:

Related manuals for Magnum QS5108

Brands by name

Popular brands

GarrettCom Magnum QS5108, Installation And User Manual

Search results

Summary of Contents for Magnum QS5108

Reviews:

Related manuals for Magnum QS5108

Brands by name

Popular brands