M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax
broadcast-protect <enable|disable>
- protect switch from broadcast storms
Syntax
rate-threshold port=<port|list|range> rate=<frames/sec>
- change the allowed broadcast
rate threshold
Chapter 9 - VLAN
Syntax
set vlan type=<port|tag|none>
defines the VLAN type
Syntax
configure vlan type=port
enter the VLAN configuration commands
Syntax
vlan type=port
enter the VLAN configuration commands
Syntax
add id=<vlan Id> [name=<vlan name>] port=<number|list|range>
[forbid=<number|list|range>] [<mgt|nomgt>] -
adding VLAN
Syntax
edit id=<vlan id> [name=<vlan name>] port=<number|list|range>
[<mgt|nomgt>] -
edit existing VLAN name
Syntax
start vlan=<name|number|list|range>
activate the VLAN configuration
Syntax
save
save the configuration (including the VLAN configuration)
Syntax
show vlan type=<port|tag> [<id=vlanid>]
display specific VLAN information
Syntax
set-port port=<number|list|range> default id=<number>
sets the default VLAN id.
For Magnum 6K family of switches, the default VLAN id is 1, unless changed using this command
Syntax
set-port port=<number|list|range> filter status=<enable|disable>
enables or disables
the VLAN filtering function.
Syntax
set-port port=<number|list|range> tagging id=<number> status=<tagged|
untagged>
defines whether the outgoing packets from a port will be tagged or untagged.
Syntax
set-port port=<number|list|range> join id=<number>
adds the specified
port(s) to the
specified VLAN id
Syntax
set-port port=<number|list|range> leave id=<number>
releases a specific port from a
VLAN
Syntax
show-port [port=<port|list|range>]
shows all parameters related to tag vlan for the list of ports.
If the port parameter is omitted, it will display all ports
266