Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
Step 3.
The figure here illustrates the basic layout of an individual PM card. 6KPM
card fits into the space provided on the main board over the grand-daughter Bd. a
nd the
( as shown in below fig. with arrow mark).
male latched cream color connectors
ig 3.5.2b: Daughter Boar
Step 4.
As shown below in Fig. 3.5.2c
Fig 3.5.2c
Bd. and the
mating connector being matched to lockup properly
Step 5.
n Fig. 3.5.2d) on the top of the latching connectors until the connectors
latch.
s
6K32F
Series chassis
F
d shown upside down with two male latch connectors
placed on the Granddaughter and main board.
Hold the daughter board with both hands at the end and
align the two cream
color latching connectors (male) placed at the bottom of the daughter board
with the other female connectors
Daughter Bd. Being placed over the Granddaughter
Once the latching connectors are aligned properly and the mounting holes are
aligned with stand offs then press slowly and firmly with two fingers (as shown
below i
Fig.3.5.2d: Securely
latching up 6KPM Card
into a Magnum
39
www GarrettCom com
.
.
