12 Garrett Metal Detectors
EuroACE™ 13
Headphone Jack
—Any headphones with a 1/4” plug can be
inserted into the jack at the rear of the Control Housing.
Battery Level Indicator
—Indicates the current battery
condition. The detector will maintain full performance until
the batteries need to be replaced. Replace batteries when
there is only 1 segment remaining. NiMH rechargeable
batteries may be used, but may have a shorter life per charge.
You can expect 20 to 40 hours of operation depending on
battery type and quality.
Access and replace the batteries by sliding the cover off
the control housing. Remove batteries when the
EuroACE
will
be stored for longer than 30 days.
Sensitivity Indicator
—The
EuroACE
has eight (8) settings
for sensitivity.
(See page 18 for information on when to adjust
your sensitivity settings.)
AUDIO FEATURES
Tone ID
—The Tone ID feature produces three distinct audible
tones based on a target’s metal type and conductivity:
• High conductivity targets (such as silver) produce a
unique belltone signal.
• Medium to low conductivity targets (such as jewelry or
small gold), produce a medium-pitched audio signal.
• Ferrous targets (such as iron and nails) produce
a low-pitch audio signal.
