background image

26 Garrett Metal Detectors

ACE 400

i

  27

 Your 

ACE 400

i

 detector is warranted for 24 months, 

limited parts and labor, but does not cover damage caused 
by alteration, modification, neglect, accident or misuse.
  In the event you encounter problems with your 

ACE 400

i

 

detector please read through this Owner’s Manual carefully 
to ensure the detector is not inoperable due to manual 
adjustments. Press and hold the power button for 5 seconds 
to return to the recommended factory settings.    
  You should also make certain you have:

1. Checked your batteries and connectors. Weak batteries 
are the most common cause of detector “failure.”

2. Contacted your dealer for help, particularly if you are not 
familiar with the 

ACE 400

i

 detector.

  In the event that repairs or warranty service are necessary 
for your 

ACE 400

i

, contact the local retail outlet where your 

detector was purchased. To avoid excessive shipping and 
import charges, do not attempt to return a Garrett product  to 
the factory in the United States. 
 Information on international warranty/repair needs can be 
found on the Garrett website: 

www.garrett.com

. Click on the 

Sport/Hobby Division and then the Technical Support page 
for more details.

ACE 400

i

 WARRANTY & SERVICE

Garrett offers a complete line of accessories that will 
increase your success and enjoyment of treasure hunting 
with your new detector. 
  These products—including optional 

ACE

 searchcoils, Garrett 

Pro-Pointer

 pinpointing detectors, and a wide selection of 

books on treasure hunting—are available from your dealer or 
by calling Garrett's factory at 1-800-527-4011.

ACE 400

i

 ACCESSORIES

To see Garrett's complete collection of metal detector accessories 
and books, please visit www.garrett.com and view products 
within our Hobby/Sport Division. 

Summary of Contents for ACE 400i
















Reviews: