TECHNICAL SPECIFICATIONS
Product type
All LS4 models
Standards / Directives
IEC 61851-1 and IEC 61439-7
EMC Classification:
2014/30/EU
Installation method:
Ground / Wall
Installation environment:
Indoor / Outdoor
Location type:
Non-restricted Access
Rated Voltage:
230V / 400V 50Hz
Installation systems:
TT, TN and IT* systems
Charging type:
Mode 3
Charging method
AC Charging
Protection class:
IP44
Mechanical impact resistance:
IK10
Temperature range:
-25C - +40C
Weight:
22,5 - 24,5kg depending on model
Standard cable length (fixed cable version):
Standard 4m
Rated current withstand
10kA
Rated short-time withstand current
10kA
Rated conditional short-circuit current of an assembly
10kA
Short-circuit protective device type
Type C
Rated impulse withstand voltage
4kV
Rated insulation voltage
230/400V
Rated current of each circuit
32A
Rated diversity factor
RDF=1
Pollution degree:
3
EMC environmental condition
A and B
SERVICE INFORMATION
Care and maintenance GARO charging station LS4
The warranty will only remain valid if service is performed.
Service is performed once a year and must be documented.
General authorization EL is required to perform service, i.e. only a qualified electrical contractor should perform the
service. The service is performed by inspecting the charging station’s exterior and interior parts, manipulating
components and conducting a functional inspection.
If the charging station is connected to a web portal or otherwise controlled from an external system via a service
provider, the service personnel must contact the service provider before a scheduled service. This is to be able to carry
out all steps in the service, but also to avoid automatic error reports being sent from the charging station when service
starts that may lead to other service personnel being called out at great expense. Normally the instructions for the
charging station indicate whether it is connected to a superior service.
If you have questions about service or a need for service, please contact your GARO retailer.
6
EN
