NORMAL USE
Connect the charging cable to the EV.
If authorization is activated, please hold a valid RFID-tag against
the RFID reader on the side of the LS4 you want to use or use the
app to authorize charging.
Charging will start instant if the EV is ready for charging. See your
EV charging manual.
When finishing charging, follow the EV’s instructions.
After charging: Release the charging cable from your EV and
place the charging cable at designated place.
SERVICE / MAINTENANCE
LED INDICATIONS
3pcs green Flash: Waiting for authorization by
tag or App
Constant green flash: Waiting for connection between
EV and LS4
EV connected to LS4 and charging
LS4 waiting for authorization from Backend
Error, reset MCB/RCCB and/or contact your LS4
installation partner
RFID-tag not valid
Electrical problem inside LS4, check fuses or/
and contact your LS4 installation partner
5
EN
