Garnet PC-900G Quick Programming Manual Download Page 35

35

NATIONAL WARRANTY: 

Alonso Hnos. Sirenas S.A. (Garnet Technology) warrants 

to the original purchaser that for a period of 18 months from the date of purchase, 

the product is free from defects in materials and workmanship under normal use. 

During the warranty period, Alonso Hnos Sirenas S.A., decides whether to repair or 

replace any defective product. Any spare or repaired part is warranted to be free 

from defects in materials and workmanship in normal use.

The original owner must promptly notify Alonso Hnos. Sirenas S.A. in writing that 

there is a defect in material or workmanship, such written notice to be received in 

all events prior to the expiration of the warranty period. The original owner must 

promptly notify Alonso Hnos. Sirenas S.A. in writing that there is a defect in mate-

rial or workmanship, such written notice to be received in all events prior to the 

expiration of the warranty period. There is absolutely no warranty of any kind on 

software. The purchaser assumes all responsibility for the proper selection, insta-

llation, operation and maintenance of any product purchased from Alonso Hnos. 

Sire- nas S.A.

INTERNATIONAL GUARANTEE: 

The guarantee for international customers is the 

same as for any customer in Argentina, with the exception that Alonso Hnos. Si-

renas S.A. will not be responsible for any customs costs, transport and/or taxes or 

duties that may be applied.

WARRANTY PROCEDURE:

 To obtain service under this warranty, please return 

the item(s) in question to the point of purchase. All authorized distributors have 

a warranty program. Anyone returning items to Alonso Hnos. Sirenas S.A. must 

first obtain an authorization number. Alonso Hnos. Sirenas S.A. will not accept any 

return shipments without first obtaining an authorization number through the RMA 

process.

FACTORS THAT VOID THE WARRANTY: 

THIS  WARRANTY  APPLIES  ONLY  TO  DE

-

FECTS  IN  MATERIALS  AND  WORKMANSHIP  RELATING  TO  NORMAL  USE.  IT  DOES 

NOT COVER:

•  Damage incurred in the handling of shipment or transport.

•  Damage caused by disasters such as fire, flood, wind, earthquake or lightning, 

etc...

•  Damage due to causes beyond the control of Alonso Hnos Sirenas S.A., such as 

excessive voltage, mechanical shock or water damage.

•  Damage caused by unauthorised couplings, alterations,

modifications or foreign objects.

•  Damage caused by peripherals (unless the peripherals were supplied by Alonso 

Hnos. Sirenas S.A.).

•  Defects caused by failure to provide a suitable environment for the installation of 

the products.

•  Damage caused by the use of products for purposes other than those for which 

they were designed.

•  Damage due to improper maintenance.

•  Damage caused by other abuse, mishandling or improper application of the pro-

ducts.

ITEMS NOT COVERED BY THE WARRANTY:

 In addition to the items that cancel the 

Warranty, the following items will not be covered by the Warranty:

(I) 

Freight cost to the repair centre;

(II)

 Products that are not identified with the Alonso product label

Hnos Sirenas S.A. and its batch number or serial number;

(III) 

Products that have been disassembled or repaired in a manner that adversely 

affects performance or does not permit proper inspection or testing to verify any 

warranty claim;

(IV) 

Products not covered by this warranty, or otherwise out of warranty due to age, 

misuse, or damage, will be assessed and will be

will provide an estimate for repair. No repair work will be performed until a valid 

purchase order submitted by the Customer is received and a Return Merchandise 

Authorisation (RMA) number is issued.

Sirenas S.A.’s liability for failure to repair the product under this warranty after a 

reasonable number of attempts shall be limited to a replacement of the product. 

In no event shall Alonso Hnos. Sirenas S.A., be liable for any special, incidental or 

consequential damages based on breach of warranty, breach of contract, negli-

gence, strict liability or any other legal theory. Such damages shall include, but not 

be limited to, loss of profits, loss of products or any associated equipment, cost of 

capital, cost of substitutes or replacement equipment, facilities or services, downti-

me, purchaser’s time, the claims of third parties, including customers, and property 

damage. The laws of some jurisdictions limit or do not allow the disclaimer of con-

sequential damages. If the laws of such jurisdiction are applicable to any claim by or 

against Alonso Hnos Sirenas S.A., the limitations and disclaimers contained herein 

shall be the broadest permitted by law. Some states do not allow the exclusion or 

limitation of incidental or consequential damages, so the above may not apply to 

you.

DISCLAIMER OF WARRANTIES: 

This warranty contains the entire warranty and 

shall prevail over all other warranties and all other warranties, whether expressed 

or implied (including all warranties implied on the goods or intended for a parti-

cular purpose) and all other obligations or liabilities on the part of Alonso Hnos. 

Sirenas S.A., who neither assumes nor authorizes any other person to act on its 

behalf, to modify or change this warranty, nor to assume any other warranty or 

liability concerning this product. This limited warranty disclaimer is governed by the 

government and laws of the province of Buenos Aires, Argentina.

WARNING:

 Alonso Hnos. Sirenas S.A. recommends that the entire system be fully 

tested for integrity on a regular basis. However, despite frequent testing, and due 

to, but not limited to, criminal sabotage or electrical interruption, it is possible that 

this product may fail to operate as expected. Out of Warranty Alonso Hnos Sirenas 

S.A. will elect to replace or repair out of warranty products that are returned to 

its factory in accordance with the following conditions: Anyone returning products 

to  Alonso  Hnos.  Sirenas  S.A.  must  first  obtain  an  authorization  number.  Alonso 

Hnos. Sirenas S.A. will not accept any shipment without an authorization number 

first. Products that Alonso Hnos. Sirenas S.A. determines to be repairable will be 

repaired and returned. A fixed charge, which Alonso Hnos. Sirenas S.A. has prede

-

termined and which will be reviewed from time to time, is required for each unit 

repaired. Products that Alonso Hnos. Sirenas S.A. determines to be unrepairable 

will be replaced with the most equivalent product available at that time. The current 

market price of the replacement product will be charged for each unit replaced.

Summary of Contents for PC-900G









































Reviews: