GTM-56KM6 User's Guide INSTALLING THE
MODEM
Garnet systems
5
2. INSTALLATION
2.1
Installing the Modem
Please follow instructions as follows in order to install modem.
- Turn off your computer and all attached peripheral devices (printer,
monitor, etc.) and unplug them from the electrical outlet.
CAUTION
:
To avoid risk of electric shock, make sure your computer and
all peripheral devices are turned off and unplugged.
- Remove the cover of your computer. For specific instructions on this
procedure, consult your system's user's guide.
- Select one of the PCI expansion bus slots. Remove and save the screw
on the slot cover. You will need it to secure the modem in place.
- Hold the modem upright by the metal edge, and carefully slide it into the
expansion slot. Gently apply pressure to the upper metal edge only,
making sure it snaps into place.
- When the modem is firmly in an expansion slot, fasten the modem into
place with the screw that fits into the top notch of the metal bracket.
- Carefully replace the computer cover in accordance with the
instructions in your system's user's guide.
- There are two modular telephone jacks on the panel of the
modem which connect the modem to a telephone line and
to a telephone handset. Because of possible safety
hazards due to the ring voltage from the telephone jack,
make the cable connections between the modem and the
telephone line in the following order.
a. Plug one end of your modular telephone cord into the
modem’s jack marked .
b. The cord will snap into place when the connection is made.
c. After the cord has been connected to the modem, plug the
other end of the cord into the wall jack.
