Page 7
Display Messages
Action
LCD Display
Description
Step 1:
Press POWER
button
GARNER
PRODUCTS, INC.
Displays Manufacturer.
Garner Products
PD-5 Crusher
Displays Destroyer Model.
FIRMWARE VER
##
Displays current firmware version.
Total Count
#
−−
##
Displays total erasing cycles.
Number on left indicates number of
times the counter reached 50,000.
Ready
Session = 0
Ready for media to be placed in the
destruction chamber.
Counter for erase cycles from power
up.
Step 2:
Insert media
Step 3
:
Press “Destroy”
Door Open
Indicates media safety door is open
–
this is normal when inserting media
to be destroyed.
Finding Media
Destroy cycle has started.
Media Found
> CRUSHING <
PD-5 switches from high speed to
high torque to crush media.
MAX FORCE
PD-5 has used maximum force and
will stop and return to home.
Going Home
Indicates PD-5 is returning to home
position (Wedge at MAX height).
Step 4:
Ready
Session = 1
Destroy cycle is complete. Open
door and remove media.
Periodic
Maintenance:
Service Required
See Operator’s Manual
Every 10,000 cycles, the PD-5
requires service. See page 13 of
manual for details
Operating Environment
Do not use or keep the PD-5 in environments with excessive heat, cold, humidity, or dust.
Use caution when bringing the PD-5 from a cold environment into a warm environment. If moisture has
accumulated due to a sudden change of temperature, wait (1) hour until moisture has completely dissipated
before operating the PD-5.
Place the PD-5 on a secure and stable horizontal surface. Position the PD-5 to allow proper air flow from the
side air inlets and the rear exhaust. A minimum clearance of 6 inches from any obstructing wall or solid surface
is recommended.
