Page 11
4)
Open the door and remove the media by gripping the end of the SSD Media Transport Sleeve. The
SSD Media Transport Sleeve is tough and designed for multiple cycles. The LCD displays “Ready
Session: 1”, indicating the destruction process is complete and a cycle has been recorded. Remove
SSD destroyer if desired.
Cleaning
Wipe dirt off with a soft and dry cloth. Do not use chemicals or solvents.
Note:
Use caution when cleaning the unit as some debris is sharp and may contain glass.
To achieve proper hard drive placement, sweep or vacuum Hard Drive debris from the inside of the PD-5. Empty
debris from the Debris Tray and remove any debris that has remained on the Support Rails. Excess debris will
alter the placement of the HDD and may cause damage to the PD-5.
(See “Cleaning the Debris Tray”, page 12.)
