Garmin VIVOFIT JR.2, Owner'S Manual

Page: 7 / 10

Settings : Allows you to customize device settings. For example,
you can turn on or off alert tones, change the steps icon, and
customize the device's display text.
Register an Accessory Band : Allows you to register an
accessory band and unlock a new adventure map.
Device Information
Specifications
Battery type User-replaceable CR1632 battery
Battery life Up to 1 yr.
Operating temperature
range From -10º to 45ºC (from 14º to 113ºF)
Radio frequency/protocol Bluetooth Smart wireless technology, 2.4
GHz @ 2 dBm nominal
Water rating 5 ATM*
*The device withstands pressure equivalent to a depth of 50 m.
For more information, go to www.garmin.com/waterrating .
Software Update
When a software update is available, your device automatically
downloads the update when you send data to your smartphone
( Sending Data Manually to Your Smartphone , page 2 ).
A progress bar and appear on the vívofit jr. 2 device during
the update process. The update can take several minutes. You
should keep the device near your smartphone during the
update. When the update is complete, your device restarts.
Viewing Device Information
You can view the unit ID and software version.
1
Hold the key to view the menu.
2 Hold .
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not place in high temperature environments, such as a
clothes dryer.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare .
User Replaceable Batteries
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Replacing the Battery
The device uses one CR1632 battery.
1
Remove the device from the band.
2
Use a small Phillips screwdriver to remove the four screws on
the back of the device.
3 Remove the rear case and battery.
4
Insert the new battery with the negative side facing the inside
of the front cover.
5
Verify the gasket is not damaged and that it is fully seated in
the rear case.
6
Replace the rear case and the four screws.
7
Tighten the four screws equally and firmly.
8
Insert the device into the flexible silicone band by stretching
the band material around the device.
The arrow on the device must be aligned with the arrow
inside the band.
Band Replacement
The stretchy band is designed to fit most children ages 4 to 7.
The adjustable band is designed to fit children 6 and older. You
can contact Garmin
®
customer support for information about
optional accessories and replacement parts. The removable
device is compatible with vívofit 3 and vívofit jr. bands.
Device Information 3