Installing the Bracket for FIAT
™
Ducato Vehicles
1 Place the upper bracket on the dock
, aligning the holes in the bracket with the holes on the top of the
dock.
2 Using the included screws , secure the bracket to the top of the dock.
The recommended torque you should apply to the screws is 5.0 to 6.0 lbf-in. (0.56 to 0.68 N-m).
3 Repeat this procedure for the side brackets .
4 Install the upper and lower chassis brackets onto the dashboard.
5 Install the dock onto the dashboard using the appropriate hardware.
6 Attach the included bezel to the front of the dock.
7 If necessary, install all remaining dashboard components.
Freightliner Cascadia Installation
You can install the device in two possible locations on the Freightliner Cascadia dashboard.
Left center panel (
Installing the Device in the Left Center Panel, page 11
Right single DIN panel and gauge area (
Installing the Device in the Right Single DIN Panel and Gauge Area,
10
