• The music files must be formatted as MP3, AAC (.m4a), or
FLAC, files.
• If you connect a portable hard drive, you must connect it to
an external power source. The USB port on this stereo
cannot provide power for a portable hard drive.
• The USB mass storage device must be formatted using one
of the following systems:
◦ Microsoft
®
: NTFS
1
, VFAT, FAT
2
, MSDOS
◦ Apple: HFS, HFSPLUS
◦ Linux: EXT2, EXT3, EX4
Playing Media from a USB Device
You can play media from a connected USB flash drive,
smartphone, or compatible portable media device.
1
Select an option:
• Locate the media USB port in your vehicle.
For more information, see your vehicle owner's manual.
• Locate the 2.1 A USB port on the back of the Vieo dock.
For more information, see the
Vieo RV 850 / RV 1050
Series Installation Instructions
.
2
Connect the USB device to the USB port.
3
Select
> >
.
4
Select the source icon (
).
5
Select an option:
• To play media from an Apple device, select
iPod
.
• To play media from a smartphone or device with Android,
select
MTP
.
• To play media from another portable media player or USB
flash drive, select
USB
.
Connecting an Auxiliary Device
You can connect various auxiliary devices to the stereo. These
devices have either RCA connectors, a line output, or a
headphone output jack.
1
If necessary, connect an RCA-to-3.5 mm adapter cable to the
auxiliary device.
2
Connect the auxiliary device to the Aux 1 connector on the
back of the stereo.
3
Select the
Aux1
source.
Connecting an Apple Device Using AirPlay
1
From the settings menu on your Apple device, connect to the
same wireless network as your compatible Fusion
®
stereo.
NOTE:
You can connect some Apple devices to the network
using a wired Ethernet connection, if applicable. Go to the
Apple website for more information.
2
On your Apple device, open the music app you want to
stream to the stereo.
3
From the music app or program, select or , and select
the name of the stereo.
4
If necessary, start playing music on the app.
The stereo changes to the AirPlay source automatically and
plays audio from your Apple device.
NOTE:
On some AirPlay devices, adjusting the volume on
the device affects the volume level on the stereo.
Setting an AirPlay Password
You can set a password that a user must enter when connecting
to the stereo using the AirPlay feature.
1
Select
> >
> >
AirPlay PASSWORD
.
2
Enter a password.
NOTE:
The AirPlay password is case-sensitive.
1
Software updates are not supported using NTFS file system.
2
FAT includes most types of FAT file systems except exFAT.
When connecting to this stereo using the AirPlay feature, the
user must enter the password on their Apple device.
Connecting a UPnP Device
You must connect your stereo to a network to play media from a
UPnP device, such as a NAS device.
1
Connect your UPnP device to the same network as the
stereo, referring to the instructions provided with your UPnP
device and router if necessary.
2
Select the UPnP source on the stereo (
).
You can browse and play media from the UPnP device the
same way that you would from a USB flash drive (
Music Playback on a Connected Android Device, USB Flash
).
Audio Control
Adjusting the Volume for a Zone
1
Select
> >
> .
2
Select a zone.
TIP:
To control all zones at the same time, select GLOBAL.
3
Drag the slider up or down.
Muting all Connected Stereos
You can quickly mute the audio from this stereo or from all
stereos connected to the network (
).
From any source, select .
The mute symbol appears and audio from this stereo is
silenced.
Adjusting the Tones
1
Select
> >
> >
ZONE
.
2
Select a zone.
3
Select
TONE
.
4
Use the slider bar to adjust the level of each tone.
Disabling the Loud Setting for a Zone
The LOUD setting maintains frequency response at low volumes
and increases perceived loudness at high volumes. This setting
is enabled by default in all zones.
1
Select
> >
> >
ZONE
.
2
Select a zone.
3
Select
LOUD
to clear the check box.
Adjusting the Gain for an Auxiliary Device
You can adjust the gain for a connected auxiliary device to
achieve a volume level similar to that of other media sources.
You can adjust the gain in 1 dB increments.
1
Select an auxiliary source.
2
Move the slider left or right to increase or decrease the gain.
NOTE:
To achieve the best audio quality when using a
portable media player with headphone output, it may be
necessary to adjust the volume control on the media player,
instead of adjusting the gain.
Speaker Zones
You can group speakers in one area into a speaker zone. This
enables you to control the audio level of the zones individually.
For example, you could make the audio quieter in the cabin and
louder on deck.
You can set the balance, volume limit, tone, subwoofer level,
subwoofer frequency, and name for each zone, and configure
other zone-specific settings (
).
Adjusting the Audio Settings for a Zone
1
Select
> >
> >
ZONE
.
14
Music Playback
