Garmin Vector 2, Quick Start Manual

Page: 11 / 74

11
E
N
Bicycle Warnings
• Always use your best judgement, and operate the
bicycle in a safe manner.
• Make sure your bicycle and hardware are properly
maintained and that all parts are correctly installed.
Pedal and Cleat Warnings
If these guidelines are not followed, your cleats may not
engage properly, and could result in serious injury.
• Read all instructions carefully before installing the
components and riding.
• Understand how the pedal locking mechanism works
before riding.
• Before riding, place one foot on the ground and
practice engaging and disengaging from the pedal
several times.
• Practice riding on a smooth surface in a safe area
first.
• Keep the pedal and cleat surfaces clean and free
of debris.
• Do not submerge or pressure wash the components.
• Use caution when walking on cleats. Do not walk on
the cleats for long distances.
• Regularly check the cleats and pedals for signs of
wear or deterioration.
• Replace worn cleats or damaged pedal bodies with
Garmin parts only. See your Garmin dealer or the
Garmin website.
Declaration of Conformity
Hereby, Garmin declares that this product is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. To view the
full Declaration of Conformity, see the Garmin Web site
for your Garmin product: www.garmin
.com/compliance.
FCC Compliance
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,