50
StreetPilot 2730 Owner’s Manual
A
PPENDIX
Updating the Software and Map Data
If you register your 2730, you will receive notification of
software and map updates. To register your 2730, go to
www.garmin.com/registration/selectreg.jsp
To update the 2730 software:
1. Load the USB drivers using the enclosed
for more information.
2. Connect the USB cable to your 2730 and your
computer.
3. Connect the AC cable to the power connector
on the back of the StreetPilot. Turn on the
StreetPilot.
4. Touch
Garmin Mode
.
5. Go to at
www.garmin.com/products/sp2730
Select
Updates and Downloads
.
6. Click
Download
next to the unit software.
7. Read and agree to the terms. Click
Download
.
8. Select
Run
(or
Open
). Your software is updated.
www.garmin.com/unlock/update.jsp
update for your map software is available.
Using a Remote GPS Antenna
Use an optional external remote GPS antenna (Garmin
GA 25) when using the unit in a vehicle with a coated
windshield or an in-screen heating system, which can
block GPS signals. Connect the antenna to the MCX
connector located on the back of the unit. To purchase,
go to the Garmin Web site:
. Click
Accessories
.
Summary of Contents for StreetPilot 2730
Page 1: ...StreetPilot 2730 owner s manual ...
Page 67: ......