M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722
Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com
©2015 M2 Antenna Systems Incoporated
05/27/15
Rev.01
Model ......................................... 2MCP22
Frequency Range ....................... 144 To 148 MHz
*
Gain .......................................... 14.39 dBic
Front to back .............................. 25 dB Typical
Elipticity ...................................... >3db
Beamwidth ............................... 38°
Feed type ................................... Folded Dipole
Feed Impedance. ....................... 50 Ohms Unbalanced
Maximum VSWR ........................ 1.4:1
Input Connector .......................... “N” Female others opt.
Power Handling .......................... 1.5 kW, 750W with PS-1
Boom Length / Dia ...................... 18’ 7” / 1-1/2” To 1”
Maximum Element Length .......... 40”
Turning Radius: .......................... 10’
Stacking Distance ....................... 10’ High & 10’ Wide
Mast Size .................................... 1-1/2” to 2” Nom.
Wind area / Survival ................... 2.5 Sq. Ft. / 100 MPH
Weight / Ship Wt. ........................ 9.5 Lbs. / 11 Lbs.
M2 Antenna Systems, Inc.
Model No: 2MCP22
FEATURES:
This cross polarized Yagi was computer designed for the serious
OSCAR
user. The average side and back lobes power have been
reduced by approximately 10 dB over any previous design, enhancing signal to noise ratio and putting all your power where it will do
the most good. The 2MCP22 is ideal for general use over the ENTIRE two meter band from FM to SSB and CW DX. Arrays of two or
more will even permit moonbounce contacts using the old reliable passive repeater in the sky.
The unique Driven Element Modules are CNC machined and feature O-ring sealed connectors. Internal connections are encapsulated
in a space age silicone gel with nearly 4 times the dielectric strength of air. The 2MCP22 is our finest circular polarized antenna. We
are confident you will be impressed with the 2MCP22 from the moment you open the box until you've worked
DXCC
and beyond!
Optional items include HDFG fiberglass crossboom kit compatible with Yaesu 5400 and 5600 series az-el rotators, power dividers
2M2PORT and 2M4PORT, polarity switch, phasing lines VHF-50-2MCP22(2) or (4), ‘H’ frames, OR-2800 azimuth and MT-1000 and
MT-3000 elevation rotators / positioners.
SPECIFICATIONS:
*Subtract 2.14 from dBi for dBd
Summary of Contents for 2MCP22
Page 5: ...2MCP22 DIMENSION SHEET...
Page 6: ...2MCP22 ASSEMBLY DETAILS...
