CHAPTER 6
GETTING THERE FAST — GOTO
The GOTO function allows you to quickly set a course from your position
to any waypoint.
GOTO Waypoint
Velocity
Distance
Direction
CDI
Time/Track
CDI PAGE (GOTO MODE)
To activate the GOTO function...
·
Press the GOTO key. The CDI Page will be displayed with the cursor
over the GOTO waypoint field on line 1.
·
Enter the desired GOTO waypoint name. Navigation information to
the GOTO waypoint will be displayed.
Alternatively, the GOTO function may be quickly activated from any page
(e.g. the Nearest Waypoint Page) by placing the cursor over the desired
waypoint name and pressing the GOTO key. The Waypoint Definition Page
will be displayed and the GOTO function will be activated upon confirmation
of the page.
You may cancel the GOTO function at any time.
To cancel the GOTO function...
·
Place the cursor over the GOTO waypoint name on the CDI Page.
·
Press the CLR key, the GOTO waypoint name will become blank.
·
Press the ENT key. The GPS 100 will start to navigate using route 0,
if available.
6-1
