Garmin nuvi 50LM, Owner'S Manual

Page: 76 / 83

74 Garmin DriveSmart™ 50LM Garmin DriveSmart™ 50LM 75
Avoiding Theft
• Remove the device and mount from sight
when not in use.
• Remove the residue left on the windshield
by the suction cup.
• Do not keep your unit in the glove
compartment.
• Register your device at http://my.garmin.
com .
Resetting the Device
You can reset your device if it stops
functioning.
Hold the power key for 12 seconds.
Removing the Device, Mount, and
Suction Cup
Removing the Device from the Mount
1 Press the release tab or button on the
mount.
2 Tilt the device forward.
Removing the Mount from the Suction
Cup
1 Turn the device mount to the right or left.
2 Apply pressure until the socket on the
mount releases the ball on the suction cup.
Removing the Suction Cup from the
Windshield
1 Flip the lever on the suction cup toward
you.
2 Pull the tab on the suction cup toward you.
Changing the Fuse in the Vehicle
Power Cable
NOTICE
When replacing the fuse, do not lose any
of the small pieces and make sure they are
put back in the proper position. The vehicle
power cable does not work unless it is
assembled correctly.
If your device does not charge in your vehicle,
you may need to replace the fuse located at
the tip of the vehicle adapter.
1 Rotate the end piece
①
90 degrees counter
clockwise to unlock it.
TIP: You may need to use a coin to remove
the end piece.
2 Remove the end piece, the silver tip
②
,
and the fuse
③
.
3 Insert a new fast-blow fuse that has the
same current, such as 1 A or 2A.
4 Place the silver tip in the end piece.