Garmin INDEX BPM, Owner'S Manual

Page: 13 / 28

Replacing the Batteries
The device operates on four AAA batteries.
1 Press the battery cover button located behind the cuff.
2 Remove the battery cover.
3 Remove the batteries from the device.
4 Insert the new batteries, observing polarity.
5 Replace the battery cover.
Troubleshooting
My device will not sync my measurements with the app
• Verify that you have completed the setup process and the device is connected using Wi‑Fi technology.
After you take a measurement, the device automatically attempts to sync through programmed Wi‑Fi networks.
Measurements are stored in the user's account until the device syncs successfully with the app.
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
When you do not plan to use the device for several months, remove the batteries.
Do not use a sharp or abrasive object to clean the device.
Avoid chemical cleaners, abrasive cleaners, solvents, and insect repellents that can damage plastic
components and finishes.
Avoid leaving the device in direct sunlight.
Cleaning the Device
If necessary, you can clean the surface of the device to remove unwanted residue, lint, and dust.
NOTE: You should clean the device at least once a year.
1 Clean the surface of the device using a cloth dampened with a mild detergent solution or clean water.
2 Wipe the device dry.
Device Information 9