GTS 8XX/GPA 65 Installation Manual
Page 2-13
190-00587-00
Revision 4TP
The coaxial cable lengths in each coaxial cable assembly set used to connect the GTS 800 TOP and
BOTTOM jacks to the top and bottom antenna jacks, the TOP GTS 820 or GTS 850 jacks to the GPA 65
jacks, and the BOTTOM GTS 820 or GTS 850 jacks to the directional antenna jacks, shall be within 2
inches of each other.
The coaxial cable assembly lengths in each coaxial cable assembly set between the GPA 65 jacks and
directional antenna jacks for the GTS 820 or GTS 850 shall be within 0.25 inches of each.
Table 2-4. Coaxial Cable Set Length Tolerance
Coaxial Cable Set
Length Tolerance*
GTS 800 TOP/BOTTOM to top and bottom
antenna
2" of each other
GTS 820 and/or 850 TOP to GPS 65
2" of each other
GTS 820 and/or GTS 850 BOTTOM to
directional antenna
2" of each other
GPA 65 to directional antenna (for the GTS
820 and/or GTS 850
0.25" of each other
* Ensure cables do not exceed the maximum lengths as stated in Table 2-3.
NOTE
It is recommended that a color band be placed on both ends of each cable to match the
color marking designating the mating jack connector.
NOTE
It is recommended that the nominal end to end coaxial cable (non-terminated) length for
each set be recorded for the specific installation in the event that a particular coaxial
cable assembly associated with an installed set should require replacement.
