WARNING:
For safety reasons, GTR 200/200B operational procedures
must be learned on the ground.
CAUTION
: The Garmin GTR 200/200B does not contain any user-
serviceable parts. Repairs should only be made by an authorized
Garmin service center. Unauthorized repairs or modifications could
void both the warranty and the pilot’s authority to operate this device
under FAA/FCC regulations.
CAUTION
: The GTR 200/200B display uses a lens coated with a special
anti-reflective coating that is very sensitive to skin oils, waxes, and
abrasive cleaners. CLEANERS CONTAINING AMMONIA WILL HARM
THE ANTI-REFLECTIVE COATING. It is very important to clean the
lens using a clean, lint-free cloth and an eyeglass lens cleaner that is
specified as safe for anti-reflective coatings.
NOTE
: All visual depictions contained within this document, including
screen images of the GTR 200/200B bezel and displays, are subject to
change and may not reflect the most current GTR 200/200B software.
Depictions of equipment may differ slightly from the actual equipment.
NOTE
: This product, its packaging, and its Components contain
chemicals known to the State of California to cause cancer, birth
defects, or reproductive harm. This notice is being provided in
accordance with California’s Proposition 65. If you have any questions
or would like additional information, please refer to our web site at
www.garmin.com/prop65.
NOTE
: Canadian installations: In accordance with Canadian Radio
Specifications Standard 102 (RSS 102), an RF safety separation
distance of 26 cm from the antenna should be maintained for an
RF field strength exposure to persons of less than the 10W/m
2
occupational safety limit.
NOTE
: Installations canadiennes : Selon les Cahiers des charges
canadien sur les normes radioélectriques 102 (RSS 102), une distance
sécuritaire de l’énergie radiofréquence (RF) de 26 cm par rapport à
l’antenne doit être en place pour que la puissance du champ RF soient
de moins de 10W/m2 afin de respecter la limite sécuritaire d’exposition
des individus.
NOTE
: The GTR COM antenna should be installed at least 20cm from
the front panel of the unit.
