38
GTN 725/750 Cockpit Reference Guide
190-01007-04 Rev. K
Pr
ocedur
es
Flying the Missed Approach
In event of a missed approach, the GTN 7XX unit continues to give guidance
along an extension of the final course segment (FAF to MAP) until you
manually initiate the missed approach procedure (as mentioned in reference to
the “SUSP” advisory).
NOTE:
If the unit is not configured for a CDI key, then the “Activate GPS Missed
Approach” will only resume automatic waypoint sequencing. The user must
switch to GPS navigation, if desired, by using their external source selection
method (this is typical an EFIS system).
1. When the MAP is reached, a pop-up will appear.
Pop-Up Upon Reaching the MAP
2. Touch the
Remain Suspended
key to continue with sequencing
suspended or touch
Activate GPS Missed Approach
for guidance to
the Missed Approach Hold Point.
Flying an Approach with a Hold
The Flight Plan Page displays a timer or distance, as appropriate, during
the holding pattern. Use this timer or distance to fly the outbound portion of
the holding pattern. The holding pattern is displayed on the Map Page and
indicated as the active leg on the Active Flight Plan pages.
NOTE:
If you need to lose extra altitude or speed by going around
the holding pattern again, touch
SUSP
to manually suspend waypoint
sequencing BEFORE crossing the holding waypoint the second time. If
you’ve already passed this waypoint, re-activate the holding pattern leg.
