4
GTN 625/635/650 Cockpit Reference Guide
190-01004-04 Rev. N
GP
S/NA
V/C
OM
Selecting a NAV/COM Frequency using Rotary Knobs
Press the center of the
small right knob
to change from the COM frequency
display to the NAV frequency display.
1. Turn or momentarily press the
small right
knob once to highlight the
STBY field of COM or NAV. The knob function defaults to COM after 30
seconds of inactivity.
2. Turn the
large right
knob to the desired MHz value.
3. Turn the
small right
knob to the desired kHz value.
4. Press the
small right
knob to confirm entry.
Frequency Flip/Flop
To flip/flop the active and standby NAV/COM frequencies, press and
hold the
small
knob or touch the active NAV/COM frequency field. An
annunciation, Hold for Flip-Flop, will be displayed near the knobs.
Voice Commands
If a GMA 350 is connected to the GTN, voice commands may be available.
Refer to
GTN 6XX/7XX Telligence Voice Command Guide
, P/N 190-01007-50.
Summary of Contents for GTN 625
Page 101: ......
