Mercury Active Trim Overlay
When enabled, you can manually adjust the trim.
When enabled, you can change between Mercury active trim preset profiles.
Active trim system status.
Enable or Disable
Select to turn the active trim system on or off.
Dometic
®
Optimus
®
Features
When connected to a compatible Optimus system, the chartplotter allows you to access and control the
system. You can enable the Optimus overlay to control the Optimus system (
Activating the Optimus Overlay Bar,
).
When necessary, the Optimus system provides messages with information, instructions, and alerts about faults
and hazards.
A no swimming icon
indicates that you should not swim when certain Optimus modes are active. In these
modes, propeller control is automatic and could injure someone in the water.
Activating the Optimus Overlay Bar
1 From a chart, select MENU > Edit Overlays.
2 Select Top Bar or Bottom Bar.
3 Select Optimus Bar.
142
Controlling Third-Party Equipment Installed on Your Boat
Summary of Contents for GPSMAP1222
Page 1: ...GPSMAP 10X2 12X2SERIES Owner sManual...
Page 14: ......
Page 213: ......
Page 214: ...support garmin com GUID C3CEA164 A1CB 4B15 92F2 5C04944CC6F3 v21 January 2024...