Garmin GPSMAP GPSMAP 196 Pilot'S Manual Download Page 10

Page: 10 / 132

The GPSMAP 196 uses 4 AA batteries, which can be Alkaline,

rechargeable, Lithium, or Ni-Cad. Immediately after installing new

batteries, turn the unit on to ensure that the unit’s power indicator

shows a full charge. Replace all batteries at the same time. Do NOT

mix new and used batteries. Do NOT mix Alkaline batteries with

Lithium or Ni-Cad rechargeable batteries. When installing new

batteries, observe the polarity markings in the case.

NOTE:

The GPSMAP 196 saves user data in non-volatile

memory. Data is not lost when the batteries are removed.

To remove the battery lid, turn the D-ring

1/4 turn counterclockwise, and pull away.

To reinstall the battery lid, place the

locking pin into the unit and turn the

D-ring 1/4 turn clockwise.

GPSMAP 196 Pilot’s Guide

ETTING

TARTED

NIT

VERVIEW

Summary of Contents for GPSMAP GPSMAP 196





































































































































Search results

Summary of Contents for GPSMAP GPSMAP 196

Reviews:

Related manuals for GPSMAP GPSMAP 196

Brands by name

Popular brands

Garmin GPSMAP GPSMAP 196, Pilot'S Manual

Search results

Summary of Contents for GPSMAP GPSMAP 196

Reviews:

Related manuals for GPSMAP GPSMAP 196

Brands by name

Popular brands