background image

Color

Marine Weather Group

Yellow

Severe Storm

Red

Tornado

Forecast Information

The Forecast chart shows city forecasts, marine forecasts, 

warnings, hurricane warnings, METARS, county warnings, 

weather fronts and pressure centers, surface pressure, and 

weather buoys.

Viewing Forecast Information for Another Time Period

1

Select 

Charts

 > 

Forecast

.

2

Select an option:
• To view the weather forecast for the next 48 hours, in 12-

hour increments, select 

Next Forecast

 multiple times.

• To view the weather forecast for the previous 48 hours, in

12-hour increments, select 

Previous Forecast

 multiple

times.

Weather Fronts and Pressure Centers

Weather fronts appear as lines that indicate the leading edge of 

an air mass.

Front Symbol

Description

Cold front

Warm front

Stationary front

Occluded front

Trough

Pressure-center symbols often appear near weather fronts.

Pressure-
Center 
Symbol

Description

Indicates a low-pressure center, which is a region of 
relatively lower pressure. Moving away from a low-
pressure center results in increased pressure. Winds 
flow counterclockwise around low-pressure centers in 
the northern hemisphere.
Indicates a high-pressure center, which is a region of 
relatively higher pressure. Moving away from a high-
pressure center results in decreased pressure. Winds 
flow clockwise around high-pressure centers in the 
northern hemisphere.

Viewing a Marine Forecast or an Offshore Forecast

1

Select 

Charts

 > 

Forecast

.

2

Pan the chart to an offshore location.
The Marine Forecast or Offshore Forecast options appear 

when forecast information is available.

3

Select 

Marine Forecast

 or 

Offshore Forecast

.

City Forecasts

City forecasts appear as weather symbols. The forecast is 

viewed in 12-hour increments.

Symbol Weather

Symbol Weather

Partly cloudy

Fair (sunny, hot, clear)

Cloudy

Rain (drizzle, sleet, showers)

Windy

Foggy

Thunderstorms

Snow (snow showers, flurries, 
blizzard, blowing snow, sleet, 
freezing rain, freezing drizzle)

Smoke (dusty, hazy)

Viewing Sea Conditions

The Sea Conditions feature shows information about surface 

conditions, including winds, wave height, wave period, and wave 

direction.

Select 

Charts

 > 

Sea Conditions

.

Surface Winds

Surface wind vectors appear on the Sea Conditions chart using 

wind barbs that indicate the direction from which the wind is 

blowing. A wind barb is a circle with a tail. The line or flag 

attached to the tail of the wind barb indicates the wind speed. A 

short line represents 5 knots, a long line represents 10 knots, 

and triangle represents 50 knots.

Wind Barb

Wind Speed

Wind Barb

Wind Speed

Calm

20 knots

5 knots

50 knots

10 knots

65 knots

15 knots

Wave Height, Wave Period, and Wave Direction

Wave heights for an area appear as variations in color. Different 

colors indicate different wave heights, as shown in the legend.
The wave period indicates the time (in seconds) between 

successive waves. Wave period lines indicate areas that have 

the same wave period.
Wave directions appear on the chart using red arrows. The 

direction of each arrow pointer indicates the direction in which a 

wave is moving.

Viewing Forecast Sea Conditions Information for 

Another Time Period

1

Select 

Charts

 > 

Sea Conditions

.

2

Select an option:
• To view forecasted sea conditions for the next 36 hours, in

12-hour increments, select 

Next Forecast

 multiple times.

• To view the forecasted sea conditions for the previous 36

hours, in 12-hour increments, select 

Previous Forecast

multiple times.

Viewing Fishing Information

The weather Fishing chart shows present water temperature, 

present surface pressure conditions, and fishing forecasts.

Select 

Charts

 > 

Fishing

.

Surface Pressure and Water Temperature Data

Surface-pressure information appears as pressure isobars and 

pressure centers. Isobars connect points of equal pressure. 

Pressure readings can help to determine weather and wind 

conditions. High-pressure areas are generally associated with 

fair weather. Low-pressure areas are generally associated with 

clouds and the chance of precipitation. Isobars packed closely 

together show a strong pressure gradient. Strong pressure 

gradients are associated with areas of stronger winds.
Pressure units are shown in millibars (mb), inches of Mercury 

(inHg), or hectopascals (hPa).
Colored shading indicates the surface temperature of the water, 

as shown in the legend in the corner of the display.

Forecasting Fish Locations

You can show areas that contain optimal weather conditions for 

specific species of fish.

NOTE: 

This feature is not available on all devices and in all 

subscriptions.

1

From the weather Fishing chart, select 

Menu

 > 

Fish 

Species

.

SiriusXM Weather

33

Summary of Contents for GPSMAP 8000 Series











































Reviews: