Garmin GPSMAP 6000 Series Owner'S Manual Download Page 121

Page: 121 / 136

GPSMAP

6000/7000 Series Owner’s Manual

115

Fusion Media Player

FUSION-Link™ Media Player

If you have a stereo equipped with FUSION-Link, you can connect it to the NMEA 2000 network and control

the stereo using the chartplotter. The chartplotter should automatically detect the FUSION-Link stereo when

it is first connected. You can play media from sources that are connected to FUSION-Link stereo and sources

that are connected to the NMEA 2000 network. For more information on the media sources and FUSION-Link

features, refer to the manual that came with the FUSION-Link stereo.

Switching to a Different FUSION-Link Stereo

If you have more than one FUSION-Link stereo connected, you can switch between stereos.
1. From the media player, select

Menu > Fusion Device

2. Select the FUSION-Link stereo.

Opening the Media Player

You can open the media player in these ways:
• Press the

Power

key, and select

Media

• From the Home screen, select

Configure

Media

• From a chart with the media bar enabled, select the media bar.

Enabling the Media Data Bar

1. From the Home screen, select

Charts

2. Select a chart.
3. Select

Menu

Data Bars

Media Bar

Repeat this process for each chart on which the media data bar should be displayed.

Selecting the Media Source

Note

: You can play only media from sources that are connected to the stereo equipped with FUSION-Link

or that are connected to the NMEA 2000 network.
1. From the media player, select

Source

2. Select a media source.

Browsing for Music

You can browse connected media devices to find the music to play.
1. From the media player, select

Source

2. Select a source to browse.

Note

: Not all source types allow you to browse, such as AM, FM, and VHF.

3. Select

Browse

4. Select options to find music to play.

Saving the Current Channel as a Preset

You can save a channel or station as a preset for quick selection, when using some sources, such as FM radio.

From the media player while using an applicable source, select an option:
• Select

Browse

Presets

Add Preset

• Select

Presets

Add Preset

Changing the Tuning Mode

You can change how you select a station for certain source types, such as FM radio.

Note

: Not all tuning modes are available for all media sources.

1. From the media player while using an applicable source, select

tuning Mode

2. Select an option:

Summary of Contents for GPSMAP 6000 Series









































































































































Search results

Summary of Contents for GPSMAP 6000 Series

Reviews:

Brands by name

Popular brands

Garmin GPSMAP 6000 Series, Owner'S Manual

Search results

Summary of Contents for GPSMAP 6000 Series

Reviews:

Brands by name

Popular brands