manualshive.com logo in svg

Garmin GPSMAP 6000 Series, Owner'S Manual

Share
Download
Garmin GPSMAP 6000 Series Owner'S Manual Download Page 11

GPSMAP

®

 6000/7000 Series Owner’s Manual 

5

Getting Started 

About the Home Screen

You can use the Home screen to access all other screens.

Note

: Options on this screen vary based on the chartplotter type and optional connected network devices.

Home Screen GPSMAP 7000 Series

Home Screen GPSMAP 6000 Series

• 

Charts

—allows you to access the Navigation Chart, Perspective 3D, Mariner’s Eye 3D, Fish Eye 3D, the 

Fishing Chart, and the Radar Overlay (

page 6

).

Note

: Mariner’s Eye 3D, Fish Eye 3D, and the Fishing Chart are available only if you use a BlueChart g2 

Vision data card (

page 21

).

• 

Sonar

—sets up and provides sonar information (only available if the chartplotter is connected to a Garmin 

sonar module) (

page 99

).

• 

Combinations

—sets up the screen to view a chart, sonar, radar, and video in a two-, three-, or four-field 

split screen (

page 28

).

• 

Information

—shows information including tides, currents, celestial data, user data, information about 

other boats, gauges, and video (

page 46

).

• 

Mark

—marks, edits, or deletes your current location as a waypoint or a man overboard location (

page 34

).

• 

Where to?

—provides navigation features (

page 42

).

• 

Radar

—sets up and shows radar (only available if the chartplotter is connected to a radar module) (

page 

72

).

• 

Weather

—(North America only) sets up and shows various weather parameters, including precipitation, 

forecast, fishing, sea conditions, and visibility (only available if the chartplotter is connected to a weather 

module and you have an XM

®

 subscription). See the 

XM WX Satellite Weather

®

 and XM Satellite Radio 

Supplement

 (North America only).

• 

Configure

—allows you to view and edit your chartplotter and system settings (

page 57)

.

• 

Man overboard

—marks your current location as a waypoint, and sets a course back to the marked 

location. (

page 34

).

Summary of Contents for GPSMAP 6000 Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands