GPSMAP 400/500 Series Owner’s Manual
5
Appendix
4. When you are on a screen you want to capture, press and hold
the
HOME
button for at least six seconds.
5. Select
OK
when the Screenshot Taken window is displayed.
To copy the screenshots to your computer:
1. Remove the SD card from the chartplotter and insert it into an SD
card reader that is attached to a computer.
2. From Windows Explorer, open the Garmin\scrn folder on the SD
card.
3. Copy the appropriate .BMP file on the card and paste it to any
location on the computer.
Caring for the Unit
The case is constructed of high-quality materials and does not
require user maintenance, except cleaning.
Cleaning the Case
Clean the unit’s outer casing (except for the screen) using a cloth
dampened with a mild detergent solution and then wipe dry. Avoid
chemical cleaners and solvents that may damage plastic components.
Cleaning the Screen
The lens on the screen is coated with a special anti-reflective coating
that is sensitive to skin oils, waxes, and abrasive cleaners. Cleaners
containing ammonia, alcohol, abrasives, or anti-grease detergents
will harm the anti-reflective coating. It is important to clean the lens
using an eyeglass lens cleaner (that is specified as safe for anti-
reflective coatings) and a clean, lint-free cloth.
NMEA 2000
The following GPSMAP 400 and GPSMAP 500 series chartplotters
are NMEA 2000 certified and can receive data from a NMEA 2000
network installed on the boat.
GPSMAP 451/451s
GPSMAP 526/526s
GPSMAP 551/551s
GPSMAP 556/556s
To connect one of these chartplotter to an existing NMEA 2000
network and to see a list of supported NMEA 2000 PGN numbers,
see the
GPSMAP 400/500 Series Installation Instructions
.
