GPSMAP 4000/5000 Series Installation Instructions
The Garmin Marine Network Cable:
• The Garmin Marine Network Cable has a locking ring that secures the cable to the
chartplotter or marine network device. Because of the size of this locking ring, it is not
connected to the network cable at the factory to make it easier to install on your boat.
• Once the cable is run to the chartplotter or network device, snap the locking ring together
around the connector and insert the rubber washer as indicated on the instructions
packaged with the cable.
Sample Garmin Marine Network Setups:
GPS 17
ADDITIONAL
NMEA
DEVICES
GARMIN GPSMAP 4000/5000
SERIES CHARTPLOTTER
GARMIN GPSMAP 4000/5000
SERIES CHARTPLOTTER
Marine Network with Two Chartplotters
Extended Marine Network With Two Chartplotters
xx
xxxxxxxxxxxxxxxxxxxxxxxxx
GPS 17
ADDITIONAL
NMEA 0183
DEVICES
GARMIN GPSMAP 4000/5000
SERIES CHARTPLOTTER
GARMIN GPSMAP 4000/5000
SERIES CHARTPLOTTER
GARMIN MARINE RADAR
GSD 22 SOUNDER UNIT
TO TRANSDUCER
GDL 30/30A XM WEATHER UNIT
NoTE:
Every device connected to the Garmin Marine Network must be connected to the boat’s power supply. These diagrams only show the
network connections, and do not show the power connections. Wire each device according to its installation instructions.
NMEA 0183 CABLE
MARINE NETWORK
CABLE
NMEA 0183 CABLE
MARINE NETWORK
CABLE
