4
GPSMAP 4000/5000 Series Installation Instructions
Marine Video Cable
The included Marine Video 17-pin cable allows input of NTSC (National Television System Committee)/PAL (Phase Alternate Line) composite
video sources, and PC monitor output (4008/4208/5008/5208 = VGA output, 4012/4212/5012/5212 = XGA output). Marine Video inputs are
only available on the chartplotter to which they are attached and will not transmit over the Garmin Marine Network.
1 & 2.
VIDEO 1 and VIDEO 2 Inputs (RCA connectors) allow input from two separate NTSC/PAL compatible video devices, such as VCR,
DVD, TV, or a video camera. The chartplotter can display one video input at a time or alternate between the two. See the Owner’s
Manual for details. Sound from a video source must be attached to a separate stereo/audio system. The video output from video device
attaches to the Video 1 (Black Cable) or Video 2 (Gray Cable) RCA connectors.
3.
Use the PC monitor output (HD 15-pin) connector for remote viewing of the MFD display on a computer monitor. The remote monitor
must be capable of at least VGA resolution and have multi-sync capability.
Note
Connector
Pin
Function
1
RCA-1
CENTER
2
VIDEO 1 IN (BLACK jACKET)
RCA-1 OUTER 6
VIDEO 1 IN, GND
2
RCA-2
CENTER
11
VIDEO 2 IN (GRAy jACKET)
RCA-2 OUTER 15
VIDEO 2 IN, GND
3
HD-15 PIN 1
1
VGA, ANALOG-RED
HD-15 PIN 2
4
VGA, ANALOG-GREEN
HD-15 PIN 3
3
VGA, ANALOG-BLUE
HD-15 PIN 5
13
VGA, ANALOG, GND
HD-15 PIN 6
8
VGA, ANALOG-RED, GND
HD-15 PIN 7
8
VGA, ANALOG-GREEN, GND
HD-15 PIN 8
8
VGA, ANALOG-BLUE, GND
HD-15 PIN 10
13
VGA, SyNC-GND
HD-15 PIN 13
7
VGA, H-SyNC
HD-15 PIN 14
12
VGA, V-SyNC
HD-15 PIN
SHELL
9
VGA, OVERALL SHIELD
1
3
2
PIN 1
PIN 2
PIN 7
PIN 17
1
3
2
PIN 1
PIN 2
PIN 7
PIN 17
Marine Video Cable
End View
Marine Video Cable
End View
