Garmin GPSMAP 392, 398, 492, 498, Owner'S Manual

Page: 113 / 122

GPSMAP 392/398/492/498 Owner’s Manual 105
A
PPENDIX
> O
PTIONAL
A
CCESSORIES
Optional Accessories
The following optional accessories are designed to enhance the
operation of the GPSMAP 392/398/492/498.
To obtain replacement parts and optional accessories, contact your
Garmin Dealer, Garmin Product Support in the U.S.A. at
800-800-1020, or Garmin Europe at 44-0870-8501241.
WARNING:
Garmin accessories have been designed
and specifically tested for use with Garmin products.
Accessories offered by other manufacturers have not been
tested or approved for use with Garmin products. Use of
such accessories could cause damage to the GPSMAP
392/398/492/498 and void the warranty.
MapSource Software CD-ROMs —enhances the basemap,
create waypoints and routes from your PC. MapSource offers
several detailed mapping options that are compatible with the
GPSMAP 392/398/492/498, including MetroGuide, BlueChart, and
Fishing Hot Spots.
BlueChart g2 Preprogramed Data Cards —enhances the
basemap featuring additional data like highly detailed coastal roads
and points of interest such as restaurants, lodging, local attractions
and more. Full-color aerial photos of ports, marinas, bridges, and
navigational landmarks are also included on many data cards.
Programmable Data Cards —blank data cards are available in 16
MB, 32 MB, 64 MB, 128 MB, and 256 MB sizes. Download street-
level map detail, points of interest, business addresses and phone
numbers, marine data, topographical information, and more from
MapSource CD-ROMs to a data card, either directly through your
GPSMAP 392/398/492/498 using the PC Interface Cable, or with
the Data Card Programmer.
USB Data Card Programmer —programs blank data cards at high
speed through a PC.
Pre-Programmed Data Cards —data cards pre-programmed with
either Garmin BlueChart or Fishing Hot Spots map data.
A/C Adapter
—powers the unit using a standard AC house current.
PC Interface Cable with Vehicle Power Adapter —connects
the GPSMAP 392/398/492/498 to a vehicle’s electrical system
on one end, and a PC, beacon receiver, marine autopilot, or other
compatible device on the other end.
Quick-Release Flush Mount Kit
—mounts your Fishfinder flush
on the bulkhead or cabin wall. Press the side clips to release the
Fishfinder so you can take it with you.
CANet ™ Connection Kit —allows you to connect your unit to
another CANet-compatible Garmin unit, so you can read sonar
displays on chartplotters located elsewhere in the boat.