Garmin GPSMAP 392, 398, 492, 498, Owner'S Manual

Page: 109 / 122

GPSMAP 392/398/492/498 Owner’s Manual 101
A
PPENDIX
> M
ESSAGES
Fish Alarm (not a textual alarm, as indicated by a fish bitmap
flashing in the upper left part of the display) —shows an icon
and a beep sounds (if enabled) when a fish is detected. This alarm
does not show a message banner.
Invalid MMSI
—enter a Valid MMSI.
Lost Satellite Reception —the unit has lost satellite signals. Check
antenna connections or try moving to a location with a clear view
of the sky.
MDB Waypoint Memory is Full, Can’t Create Waypoint
—unit
memory is full; no further data can be saved.
Proximity Alarm
—you are nearing a proximity waypoint.
NMEA Depth Is Below Transducer —you must enter an
appropriate Keel Offset for the transducer.
No Tide Stations for that Area
—no tide stations within 100 miles
of the area.
No Proximity Waypoints/Routes/Tracks/User Waypoints
Found— attempted to transfer user data from a data card that does
not contain the specified type of data. Make sure there is data to
transfer on data card.
Off Course Alarm
—you are off course the distance set in the “Off
Course” alarm.
Proximity Alarm —you entered the alarm radius for the proximity
waypoint indicated.
Proximity Alarm Memory Full —you used all available proximity
waypoints.
Proximity Overlaps Another Proximity Waypoint —the alarm
radius specified overlaps the area specified for another proximity
waypoint. Adjust the distance.
Route Already Exists —you entered a route name that already
exists in memory. Modify the route name or delete the previous
route name.
Route Full —you attempted to add more than 300 points to a route.
Reduce the number of points or create a second route.
Route Truncated —uploaded route from another device has more
than 300 waypoints and was truncated to fit.
Route Waypoint Memory Full —no additional route waypoints
can be saved.
Shallow Water Alarm —the Shallow Water Alarm depth has been
reached.
Simulating Operation —the unit is in Simulator Mode. Do not use
for normal navigation.
Sonar Failed, Unit Needs Repair —there is an internal problem
with the unit. Contact your dealer or Garmin Product Support to
have the unit serviced.