54
Reference
Going to a Destination/
TracBack Navigation
‘Go To MAP Point’ allows you to
navigate to a spot on the map that is
not a waypoint or map item.
Highlight ‘Save’ and press
ENTER
to save an active track log.
To activate an existing waypoint or map item as a ‘Go To’ from the map display:
1. Use the
ARROW KEYPAD
to highlight the waypoint or map item on the screen and press
NAV
.
2. With ‘Go To <waypoint name>’, press
ENTER
.
To activate a new map point (non-map item) as a ‘Go To’ from the map display:
1. Use the
ARROW KEYPAD
to move the arrow cursor to the desired position and press
NAV
.
2. With ‘Go To MAP Point’ highlighted, press
ENTER
.
To stop navigation:
1. Press the
NAV
key. Use the
ARROW KEYPAD
to highlight ‘Stop Navigation’ and press
ENTER
.
TracBack Navigation (Follow Track)
The TracBack function allows you to retrace your path using the track log automatically stored in
the receiver’s memory, which eliminates the need to store waypoints along the way. TracBack routes are
created by reducing your track log into a route of up to 50 turns and activating an inverted route along
those points. Once activated, a TracBack route leads you back to the oldest stored track log point, so it’s
a good idea to clear the existing track log before you start your current trip.
To clear the track log and defi ne a starting point for a TracBack route:
1. Press
MENU
twice to display the Main Menu page.
2. Using the
ARROW KEYPAD
, highlight the ‘Track’ tab, then highlight the ‘Active’ tab to the right.
3. Use the
ARROW KEYPAD
to highlight ‘Erase’ and press
ENTER
.
4. Highlight ‘OK’ and press
ENTER
.
You must fi rst save the track log before you can use the ‘Follow Track’ feature. The Save feature
allows you to store up to 15 track logs from certain times and dates.
To save a track log:
1. From the Main Menu, use the
ARROW KEYPAD
to highlight the ‘Track’ tab, then highlight the
‘Active’ tab to the right.
GPSMAP178CManual.indd 54
3/19/2004, 3:10:26 PM
