background image

8

GMR 18 Marine Radar Installation Instructions

Warnings

Failure to avoid the following potentially hazardous situations could 

result in an accident or collision resulting in death or serious injury.

•  The radar scanner transmits electromagnetic energy. Ensure that the 

scanner has been installed according to the recommendations given 

in this guide, and that all personnel are clear of the scanner before 

switching to transmit mode. 

• 

When navigating, carefully compare information displayed on 

the unit to all available navigation sources, including information 

from visual sightings, and maps. For safety, always resolve any 

discrepancies or questions before continuing navigation.

•  Use this unit only as a navigational aid. Do not attempt to use the unit 

for any purpose requiring precise measurement of direction, distance, 

location, or topography. 

WARNING:

 This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. 

This Notice is provided in accordance with California’s Proposition 65. See 

www.garmin.com/prop65

 for more information.

FCC Compliance

The GMR 18 complies with Part 80 of the FCC rules. It has received a grant of equipment authorization, issued under the authority of the FCC.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
•   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Industry Canada Compliance

The Garmin 18 Marine Radar complies with Industry Canada Standard RSS-138.

Declaration of Conformity (DoC)

Hereby, Garmin, declares that this GMR 18 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
To view the full Declaration of Conformity, see the Garmin Web site for your Garmin product: 

www.garmin.com/products/gmr18/

Click 

Manuals

, and then select the 

Declaration of Conformity

 link.

Summary of Contents for GPS 18-5Hz













Reviews: