Garmin GNX 375 Pilot'S Manual Download Page 217

Page: 217 / 244

Messages

190-02207-02 Rev. B

GPS 175/GNX 375 Pilot’s Guide

6-3

6.3

Database Advisories

ADVISORY

CONDITION

CORRECTIVE ACTION

database not
available.

The indicated database

is unavailable or corrupt.

Re-download and install the

indicated database. Contact a
Garmin dealer for support.

Terrain display

unavailable for
current location.

Terrain database cannot

provide elevation at the
current GPS position.
Aircraft is outside the
database coverage area.

Load appropriate coverage

area onto the external
datacard.

Verify user-modified

procedures in
stored flight plans
are correct.

Navigation database

updates and the stored
flight plan contains
user-modified
procedures.

Verify the procedures are

correct.

Verify airways in

stored flight plan
are correct.

The stored flight plan

contains an airway that
is inconsistent with the
current navigation
database.

Verify all airways are correct.

If necessary, reload airways to
the stored flight plan routes.

A procedure has

been modified in a
cataloged flight
plan.

Database update causes

flight plan to exceed
100 waypoint limit.
Procedure is removed or
truncated as a result.

Verify cataloged flight plan

and procedures are correct. If
necessary, reload procedures
to the stored flight plan
routes.

Aircraft in area with

large mag var.
Verify all course
angles.

Magnetic variation

flagged as unreliable in
the MagVar database.
Typically occurs when
operating at high
latitudes that do not
support a magnetic
NAV angle.

Verify that the geographical

region supports navigation
based on magnetic variation.

Summary of Contents for GNX 375





















































































































































































































































Search results

Summary of Contents for GNX 375

Reviews:

Related manuals for GNX 375

Brands by name

Popular brands

Garmin GNX 375, Pilot'S Manual

Search results

Summary of Contents for GNX 375

Reviews:

Related manuals for GNX 375

Brands by name

Popular brands