Garmin GNS 530W, Pilot'S Manual & Reference

Page: 13 / 230

3
TAKEOFF TOUR
Right-hand Keys and Knobs
���
The range key ( RNG ) allows you to
select the desired map scale. Use the
up arrow side of the key to zoom out
to a larger area, or the down arrow
side to zoom into a smaller area.
D
The direct-to key (direct-to) pro-
vides access to the direct-to function,
which allows you to enter a destina-
tion waypoint and establishes a direct
course to the selected destination.
See Section 3.
MENU
The menu key (MENU) displays
a context-sensitive list of options.
This options list allows you to access
additional features or make settings
changes which relate to the currently
displayed page.
CLR
The clear key ( CLR ) is used to erase
information or cancel an entry. Press
and hold this key to immediately
display the Default Navigation Page,
regardless of the page that is cur-
rently displayed.
ENT
The enter key (ENT) is used to
approve an operation or complete
data entry. It is also used to confirm
information, such as the Database
Page during power on.
t
The
large right
knob (GPS) is used
to select between the various page
groups: NAV, WPT, AUX or NRST.
With the on-screen cursor enabled,
the large right knob allows you to
move the cursor about the page.
r
The small right knob (PUSH CRSR)
is used to select between the various
pages within one of the groups listed
above. Press this knob momentarily
to display the on-screen cursor.
The cursor allows you to enter data
and/or make a selection from a list of
options.
Data is entered using the
large
and
small
right knobs
. Experiment with them to be-
come efficient at entering data. This greatly
reduces the amount of time spent operating
the 500W-series unit in flight.
Key and Knob Functions