Garmin GNC 420AW, Installation Manual

Page: 4 / 236

Page B 400W Series Installation Manual
Rev. G 190-00356-02
CURRENT REVISION DESCRIPTION
Revision
Page
Number(s)
Section
Number
Description of Change
i TOC Changed software version from 3.10 to 3.20
1-18 1.9 Updated contact phone number for Garmin (Europe) Ltd.
3-12 3.13.1 Corrected formatting of Table 3-7.
4-13 4.6.1.2
Added note to indicate that additional output settings may be available
on unit installed via OEM TC.
5-4 5.3.1
Added note to indicate that additional output settings may be available
on unit installed via OEM TC.
5-7 5.3.1
Added ADS-B OUT to Channel Outputs table. Also added note [4] to
indicate the ADS-B OUT is only available with main software version
3.20 or later.
5-15 5.3.11 Added table with information for V-Flag State
5-22 5.3.20
Added note to explain steps that need to be taken to display an
alternate traffic color.
5-41 Checkout Log Added V-Flag State to Main CDI/OBS Configuration section.
6-6 6.2
Added ‘check GPS Antenna’ to the Alert Text ‘GPS is not responding’
in Table 6-2.
H-51 Appendix H
Updated Figure H-32 to include note that the ILS/GPS approach
discrete is required by some CDIs/HSIs that are used with the M4C/D
Autopilots.
G
H-55 Appendix H
Updated Figure H-35 to include note that the low level flags or
superflags can be connected, but not both.
DOCUMENT PAGINATION
Section Pagination
Table of Contents i – viii
Section 1 1-1 through 1-18
Section 2 2-1 through 2-14
Section 3 3-1 through 3-14
Section 4 4-1 through 4-22
Section 5 5-1 through 5-44
Section 6 6-1 through 6-10
Section 7 7-1 through 7-4
Section 8 8-1 through 8-2
Appendix A A-1 through A-2
Appendix B B-1 through B-2
Appendix C C-1 through C-2
Appendix D D-1 through D-4
Appendix E E-1 through E-6
Appendix F F-1 through F-8
Appendix G G-1 through G-8
Appendix H H-1 through H-58