background image

PRELIMINARY

PRELIMINARY

GMR 404/406 Owner’s Manual 

 1

GMR 404/406 O

PERATION

Radar  Overview

The Garmin GMR 404/406 transmits a narrow beam of microwave 

energy in a rotating 360° pattern. When the transmitted energy 

contacts a target, some of that energy is refl ected and returned to the 

scanner. The scanner collects the returned energy for processing and 

display. The GMR 404/406 is operated and adjusted using controls 

on the Gamin chartplotter. Radar data is presented on a dedicated 

Radar Page or as an overlay on the Map page. All radar controls are 

accessible on both pages.

The   Radar Page

With the GMR 404/406 radar properly installed, at power up, the 

Garmin chartplotter should detect the GMR 404/406 as a new 

network connection. 

Note:  

A  

software update may be needed for the GMR 404/406 to 

function properly. If the message “Incompatible Software 

Version” is displayed when the chartplotter is powered on, the 

software in the chartplotter needs to be updated. A software 

update card is provided with the GMR 404/406.

When the new radar is detected, the chartplotter automatically 

adds a dedicated Radar Page to the pages list. If the Radar Page is 

not available, press and hold 

ADJ/MENU

 until the Main Menu is 

displayed. Use the 

Rocker t

o highlight the 

System

 tab, and select 

Radar

 from the Services list at the bottom of the page.

To Select the Radar Page for display:

1.  Press 

PAGE

 to display the Pages list. 

2.  Using the 

Rocker,

 select 

Radar

.

3.  Press 

ENTER

Pages List

 GMR 404/406 O

PERATION

 > 

R

ADAR

 O

VERVIEW

—T

HE

 R

ADAR

 P

AGE

 

Prelimimary Copy—For Review Only

 GMR 404/406 O

PERATION

 > 

 GMR 404/406 O

PERATION

 > 

GMR 404_406 Owners Manual Preliminary Review.indd   1

3/27/2006   4:08:13 PM

Summary of Contents for GMR 406

































Reviews: