PRELIMINARY
PRELIMINARY
GMR 404/406 Owner’s Manual
17
To select an AFC mode:
1. Use the
Rocker
to highlight the AFC Mode fi eld, and press
ENTER
.
2. Use the
Rocker
to highlight the selection, and press
ENTER
.
To manually adjust the scanner frequency:
1. Use the
Rocker
to highlight the
Freq
button, and press
ENTER
.
2. Using the
Rocker
, adjust the scanner frequency up or down to
achieve the desired effect.
3. Press
ENTER
to accept the frequency change.
NOTE:
The Signal Strength bar graph is damped and may be
slow when responding to frequency tuning changes.
Enter Standby/ Begin Transmitting
Selecting
Enter Standby
places the scanner into Standby mode
While in Standby mode, the scanner does not transmit, but power
remains applied to the Magnetron.
If the scanner is in Standby mode,
Begin Transmitting
is enabled.
Selecting
Begin Transmitting
removes the scanner from Standby
mode, and after “Spinning Up”, the scanner begins transmitting.
To select Enter Standby or Begin Transmitting:
Use the
Rocker
to highlight the
Enter Standby
or
Begin
Transmitting,
and press
ENTER
.
Map Page Radar Overlay
Radar information can be displayed as an overlay on the Map page.
With radar information overlaid on the map, many of the radar
options are available by pressing the
ADJ/MENU
key.
It is important to note that changing the “Range” of the map does not
change the scanner range. When the Map page is zoomed in or out,
the radar overlay is scaled to fi t.
To overlay radar data on the Map Page:
1. Press
ADJ/MENU
.
2. Use the Ro
cker
to highlight
Show Radar,
and press
ENTER
.
To hide the Radar Overlay:
1. Press
ADJ/MENU
.
2. Use the
Rocker
to highlight
Radar Options,
and press
ENTER
.
3. Use the
Rocker
to highlight
Hide Radar,
and press
ENTER
.
GMR 404/406 O
PERATION
>
M
AP
P
AGE
R
ADAR
O
VERLAY
Prelimimary Copy—For Review Only
GMR 404/406 O
PERATION
>
GMR 404/406 O
PERATION
>
GMR 404_406 Owners Manual Preliminary Review.indd 17
3/27/2006 4:08:22 PM
