190-01134-11
GMA 350/350c/350H/350Hc Installation Manual
Rev. J
Page 3-2
NOTE
1. Non-Garmin part numbers shown are not maintained by Garmin and consequently are subject
to change without notice.
2. Extracting the #18 and #20 contact requires that the expanded wire barrel be cut off from the
contact. It may also be necessary to push the pin out from the face of the
connector when using an extractor due to the absence of the wire. A new contact must be used
when reassembling the connector.
3.5 Backshell Assembly
The GMA 350/350H connector kit includes two Garmin backshell assemblies. Garmin’s backshell
connectors give the installer the ability to quickly and easily terminate shield grounds at the backshell
housing using the Shield Block. To assemble the backshell connectors and grounding system, refer to
instructions provided in the Shield Block Installation Instructions (190-00313-09).
Table 3-2. Recommended Crimp Tools
Manufacturer
Hand
Crimping
Tool
18-20 AWG
22-28 AWG
Positioner
Insertion/
Extraction
Tool (Note 2)
Positioner
Insertion/
Extraction
Tool
Military P/N
M22520/2-01
N/A
M81969/1-04
M22520/2-09
M81969/1-04
Positronic
9507
9502-11
M81969/1-04
9502-3
M81969/1-04
AMP
601966-1
N/A
91067-1
601966-6
91067-1
Daniels
AFM8
K774
M81969/1-04
K42
M81969/1-04
Astro
615717
N/A
M81969/1-04
615725
M81969/1-04
