190-02081-03
GFC 600H HFCS Part 27 STC Maintenance Manual
Rev. 3
Page 6-31
6.7 Collective Position Sensor
During removal and re-installation, do not allow the steel sensor cable to snap back (i.e., freely retract).
Likewise, do not pull the steel cable beyond its maximum extension length of 2 inch limit, as it will
damage the sensor. Tension must be maintained on the cable at all times.
NOTE
See the GMC 605 Installation Manual (Garmin P/N 190-01488-01) for the collective
position sensor wiring details.
NOTE
Removal, re-installation, or replacement of the collective position sensor requires sensor
calibration (for range of motion).