Garmin GDL 88, Installation Manual

Page: 27 / 44

GDL 88 TSO Installation Manual Page 4-5
190-01122-00 Rev. A
Table 4-4. Socket Contact Part Numbers
Wire Gauge
Configuration Module
78-pin Connector (P1001)
P1001-P1005
28 AWG [1] 22-28 AWG [2]
Garmin P/N 336-00021-00 336-00021-00
Military P/N N/A M39029/58-360
AMP N/A 204370-2
Positronic N/A MC8522D
ITT Cannon N/A 010-2042-000
[1] For configuration module pins, ensure that the crimp tool is set to crimp 28 AWG wire
(indenter setting of „4‟).
[2] Contacts listed are not to be used for configuration module wiring. Use the contacts
supplied with the configuration module when installing configuration module wires in
P1001.
[3] Non-Garmin part numbers shown are not maintained by Garmin and are subject to
change without notice.