G1000 Supplemental Maintenance Manual
Page 7-20
Textron Nav III Series
Revision 3
190-02128-04
GEA 71 Test
On the MFD (normal mode), check the indication for each of the sensor or monitor inputs with
the aircraft engines off.
In general, verify all engine and system instruments show valid static normal values and
markings, with no red Xs or erratic indications. Reference Figure 7-3 for normal engine
instrument markings (figure may not reflect actual aircraft installation). If individual engine
readings do not appear normal or have a red-X over them, refer to the G1000 Nav III Line
Maintenance Manual.
Figure 7-3, Normal Engine Instrument Markings (MFD)
If no other service is to be performed and individual GEA input testing is not required, continue
to the return-to-service checks in Section 9.
Summary of Contents for G1000 NXi
Page 61: ......
