3
From the music app or program, select or , and select the name of the
stereo.
4
If necessary, start playing music on the app.
The stereo changes to the AirPlay source automatically and plays audio
from your Apple device.
NOTE:
If your Apple device is using AirPlay 2 software, you can connect to
multiple stereos on the same network.
NOTE:
You cannot stream the AirPlay source to other stereos on the
network using the Fusion PartyBus network. Using AirPlay 2 software, you
can play content on multiple stereos on the network, but the stereos must
not be grouped.
NOTE:
On some AirPlay devices, adjusting the volume on the device affects
the volume level on the stereo.
Configuring a Wireless Access Point for Apple AirPlay
For the best results when using Apple AirPlay, you should set up this stereo as a
wireless access point and connect to it using your compatible Apple device.
NOTE:
By default, Wi‑Fi
®
is off on the stereo.
1
From the stereo screen, select >
SETTINGS
>
NETWORK
>
WI-FI ACCESS
POINT
.
2
Write down the
SSID
and
PASSWORD
.
3
Select
SAVE
.
4
Connect your Apple device to the stereo wireless access point using the
SSID
and
PASSWORD
.
Playing Music
Setting the Tuner Region
You must select the region you are in to receive AM and FM stations properly.
If you are connected to a compatible SiriusXM
®
tuner and antenna, and have
a subscription (USA only), you must select the region you are in to receive
SiriusXM stations properly.
NOTE:
SiriusXM service is not available in all regions.
You must select the region you are in to receive DAB stations properly.
NOTE:
DAB stations are not available in all regions.
1
Select >
SETTINGS
.
2
Select
TUNER REGION
.
3
Select the region you are in.
Changing the Radio Station
1
Select an applicable source, such as
FM
.
2
Select
to select a tuning mode.
You can use AUTO mode to scan stations, MANUAL mode to manually tune
to a station, and PRESET mode to select the next preset station.
3
Select or to tune to the station.
TIP:
You can quickly save the selected station or channel as a preset by
holding
.
Scanning for DAB Stations
NOTE:
Because DAB signals are broadcast in select countries only, you must
set the tuner region to a location where DAB signals are broadcast.
1
Select the
DAB
source.
2
Select to scan for available DAB stations.
When scanning is complete, the first available station in the first ensemble
found begins playing.
NOTE:
After the first scan is complete, you can select again to re-scan
for DAB stations. When the re-scan is complete, the system starts playing
the first station in the ensemble you were listening to when you started the
re-scan.
SiriusXM Satellite Radio
Only SiriusXM brings you more of what you love to listen to, all in one place.
Get over 140 channels, including commercial-free music plus the best sports,
news, talk, comedy and entertainment. Welcome to the world of satellite radio.
Quick Start Manual
7
EN
DRAFT
