Garmin Fishfinder 80 Pilot'S Manual Download Page 19 | Manualshive

Page: 19 / 50

background image

Apollo CNX80 Pilot’s Guide

15

Nearest Waypoints (NRST)

The Nearest Waypoint Search function allows you to search for the 20
waypoints nearest to your present position in each waypoint type.
There are eight waypoints types: Airport, VOR, NDB, INT, User, FSS
(Flight Service Station), and Air Route Traffic Contol Center (ARTCC).
The last Menu selection lets you set Limits to select a range of airport
types to show up for the Nearest Airport type. You can then look up
information about that waypoint by pressing INFO or fly direct to it by
pressing the Direct-To key. See “Information on Waypoints (INFO)” on
page 17 for more information on waypoint types.

1. Press NRST to display the Nearest waypoints.
2. The Nearest waypoint type labels are shown on the right side of the

display. Press the Line Selection key next to the waypoint type label
that you want.

3. Turn the Large knob to highlight (green) the waypoint you want to

select.

SRCH
Search near a selected waypoint.

Nearest Frequency
While viewing the Nearest waypoints that have frequency information,
you can transfer the displayed frequency to the Active or Standby fre-
quency. The CNX80 automatically knows if it is a Com or a VOR fre-
quency.
1. Press NRST.
2. Press the Line Selection key for the waypoint type you want to

search.

3. Turn the Large knob to scroll thru the list of nearest waypoints, such

as Airport, VOR, User if a frequency is present, FSS, or ARTCC. High-
light the desired waypoint.

Ne
are
st

CNX80 Pilot Guide 560-0984-00C Draft1.book Page 15 Tuesday, September 2, 2003 10:36 AM

«
...
17
18
19
20
21
...
»

Summary of Contents for Fishfinder 80



















































Reviews:

No comments

Related manuals for Fishfinder 80

Showdown Troller

Brand: Marcum Technologies Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands